DocuXplorer can operate on your existing network hardware. Workstations require Microsoft Windows XP sp3 or later 32 or 64bit, Pentium 4 processors with at least 1 GB or more. DocuXplorer’s internal database server will work side-by-side with a SQL or other company server. DocuXplorer was designed so that there would be little or no database maintenance and has a very small foot print. Microsoft Internet Explorer 8 or greater must be installed on your workstation prior to the installation of DocuXplorer.
For five or fewer users, you can use a workstation or a dedicated server (including virtual machines) running Windows 2003 or newer, Novell or Linux. However, servers are recommended for systems with five or more users. If you have a large number of documents to store, you may want to add a large hard drive to your network for document storage. You should also have an adequate back-up system in place (see DocuXplorers My Secure Backup Services).
If you plan on scanning documents into DocuXplorer, you will need a scanner with an auto-document feeder for paper documents. The scanner speed will depend on your daily scanning needs.
Click here for the Advantage Database Server software requirements:
Sybase PDF documentation
Enterprise hardware recommendations are as follows:
For up to 50 users:
- Processor: Dual 1.5 GHz Xeon
- RAM:8 GB Controller: SCSI (second controller preferred) with Hardware RAID 5 (3 drives for RAID 5) Network Card: 10/100 Mb Network Card For 50-100 users – large deployments require dedicated servers
- Processor: Dual 1.8 GB Xeon RAM: 8 GB Controller: SCSI with Hardware RAID 5 (3 drives)
- Network Card: 100 Mb Network Card
For more than 100 users:
- Processor: Dual 2 GHz Xeon RAM: 16 GB Controller: SCSI (second controller preferred) with Hardware RAID 5 (3 drives for RAID 5)
- Network Card: 100 Mb Network Card